The New REA Scancheck 3

Isis Integration are distributors of REA products in the UK.
For full details on the new Scancheck 3 see our
product information page.

Announcing the REA ScanCheck 3, the new all-round barcode verifier for production and quality management

The REA ScanCheck 3 is a universal high performance barcode verifier which meets to ISO standards. It produces reports which allow to proof that quality agreements are fulfilled. Automatic size determination provides easy use and user independent verification. The measuring system is based on a laser scanner system adapted to the requirements for verification. This technique leads to contactless measurements.
The power supply is provided by standard AA rechargeable batteries. These allow full portable operation. The REA ScanCheck 3 supports German and English. Other languages can be added by the aid of a translation tool. For quick operation and ergonomic operation the REA ScanCheck 3 is equipped with a large colour display and a powerful 32bit CPU. Reports can be stored locally or saved on a PC using a USB/Network device and REA TransWin32 software. Additionally the REA ScanCheck allows connecting a portable battery powered report printer. The REA ScanCheck 3 includes always a GS1-128 data content checker with no extra price.

• Contactless verification by a laser scanner designed for verification
• Meets ISO/IEC 15416 and incorporates optional parameters
• Designed to verify high and low density barcodes
• Powered by rechargeable batteries to ensure portability
• Automatic bar size determination and verification
• Short information Good, Warning or Fail by red, yellow or green lights
• Large colour display for ergonomic use

Hardware options:

Report printer REA TD-GPT-U
The portable thermal printer is connected by a USB cable to the REA ScanCheck 3. The printer has its own power supply by using an internal rechargeable battery pack. The printer uses 57 mm wide thermal paper. The paper roll is fixed inside and cannot fall out while using the printer portable. The printer is able to print the scan reflectance profile.

20 mil Adaptor plate:
To be able to measure large codes like ITF-14 or other codes on transport labels the measuring aperture can be increased to 20 mil by the aid of the 20 mil adaptor.

Features:

• Powerful 32 bit ARM9 CPU
• Contactless measurement by laser scanner technology
• Easy software update by Flash-ROM technology
• Software option upgrade by access codes
• Password protection for setup
• Multilanguage user interface
• Auto discrimination of major barcodes
• Order number assignment
• Memory for 100 reports, expandable by MMC Card
• Full analysis to ISO, ANSI and CEN standards
• Additional analysis of optional parameters including a detailed metric evaluation
• Selectable PCS evaluation for best and worst contrast case
• Optional parameters can be graded, viewed non-graded or disabled
• Averaging of up to ten scans. Count of non decoding scans in average measurement
• Automatic size measurement and verification
• Verification of light margin
• Wide to narrow ratio measurement for two-bar- width barcodes

Software options:

Optional symbologies:
Additional code symbologies. Special codes from health industry and for parcel services.

REA TransWin32
A data capture program for Windows PCs. This enables the verification reports to be displayed, saved and printed on a PC. Additionally the REA ScanCheck 3 can be remotely configured by TransWin32. REA TransWin32 is designed for PCs with Windows 2000, XP and VISTA.

REA Article Look Up: This option allows an article description to be shown on the display of the REA ScanCheck 3. Each article can be assigned with price and date fields. The date fields will be compared with the date in a GS1-128 barcode. If the encoded date is outside of the range specified in the Article Look Up the REA ScanCheck 3 will show an error message. This function is very useful to extend bar quality control with the verification of data like “best before use”.

Comparator: This option allows the comparison between a master code and the verified codes. If the verified code content is not identically with the preset, the REA ScanCheck 3 shows an error message.

To join our mailing list, please complete this form:

Title:

First Name:

Last Name:

Email:

Company: